CAD (0)
▾
The EB25 Plus brings state-of-the-art water control technology to pressure regulators. The accurate flow control and pressure regulation of the EB25 Plus eliminates the need for costly multi-valve installation such as high-low valves installed in parallel to meet varying flow requirements or multi-valves installed in series to reduce high inlet pressures to desired line pressure.
The EB25 Plus is a lead-free product designed to service commercial and institutional water installations that experience wide variation in water demand or for applications where there are high inlet pressures. The valve is available in 2-1/2”, 3”, and 4” sizes, all with flanged connections. The valve is factory set at 55 psi.
The EB25 Plus is a lead-free product designed to service commercial and institutional water installations that experience wide variation in water demand or for applications where there are high inlet pressures. The valve is available in 2-1/2”, 3”, and 4” sizes, all with flanged connections. The valve is factory set at 55 psi.
Unit of Measure
Type |
N/A Pressure Regulator |
Connection Type |
N/A Flanged |
Size |
N/A 4" |
Operating Temperature [Max] |
N/A 149 ºF |
Operating Pressure [Min] |
N/A 30 psi |
Operating Pressure [Max] |
N/A 85 psi |
Maximum Inlet Pressure |
N/A 300 psi |
L |
N/A 13.78 in350 mm |
D |
N/A 3.94 in100 mm |
H |
N/A 10.95 in278 mm |
Body Material |
N/A Lead free dezincification resistant bronze |
Strainer Material |
N/A Stainless steel integral strainer |
Spring Material |
N/A Stainless steel |
Seals & Diaphragm Material |
N/A High temperature rated aging resistant elastomer (EPDM) |
Features and Benefits |
N/A Service all the parts quicker and easier: Single piece cartridge can be removed with valve body remaining in place. Regulate minimum to maximum flow effectively with one valve: Coaxial double spring design eliminates the need for high flow- low flow (1/3 – 2/3) valve arrangement with a single valve. EB25 Plus PRV saves cost on additional valve and associated accessories with savings on installation time and most importantly valuable space. No add-ons or small parts, longer life and more reliable performance: Integral back-pass with the cartridge. Meets the latest stringent international standards, quieter installation: Cutting edge design and production incorporates “micro-fingers” that dissipate noise due to water flow across the seat. No more dummy valve necessary: Available with a blanking cap for “rough-in” installations. |
Specification |
N/A A pressure regulating valve shall be installed to reduce high supplies of incoming water pressure. The valve shall have a single cartridge that can accommodate a high range of flow conditions. The valve shall be a Cash Acme EB25 Plus. |
Typical Installation |
N/A The Cash Acme EB25 Plus Pressure Regulator comes supplied with a pre-adjusted pressure set at the factory. The pressure can be easily adjusted in the field by use of a spanner. The EB25 Plus Pressure Regulator can be mounted in any position – vertical, horizontal, upwards, inverted or any other desired orientation. |
Service |
N/A Potable water |
