Thermostatic Mixing Valves (TMV)
thermostatic-mixing-valves-tmv
The Tank Booster is intended for installation at the water heater to distribute controlled temperature water through hot water systems in residential and commercial applications. The valve delivers water at 120°F (49°C), allowing the heater to be set at 140°F (60°C) or higher, thus providing a greater effective volume of hot water and reducing the chances of Legionella bacterial growth in the water.
The Tank Booster is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed.
The Tank Booster incorporates a fast-acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Tank Booster is factory set at 120°F (49°C), but can easily be adjusted.
The Tank Booster is designed for easy and quick installation and is shipped complete with the valve, flexible connector and water heater tee. Can be used with SharkBite flexible water heater connectors for easy installation while using Copper, PEX, or CPVC tubing. Does not require any transition fittings.
/Asset/24832_3.jpg
The Heatguard® 110-D is intended for installation at the water heater to distribute controlled temperature water through the domestic hot water system or at point-of-use applications. The valve delivers water at a maximum of 120°F (49°C), allowing the heater to be set at 140°F (60°C) or higher, thus providing a greater effective volume of hot water and reducing the chances of Legionella bacteria growth in the water.
The Heatguard® 110-D is a high quality mixing valve incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for both distribution and point-of-use applications.
The Heatguard® 110-D incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Heatguard® 110-D features a locking mechanism to prevent unwanted adjustment above 120°F (49°C).
The Heatguard® 110-D is shipped complete as a kit with your choice of end connections in 1/2", 3/4" & 1" sizes. Available end connections are sweat, CPVC, PEX, threaded and SharkBite®. All valves are supplied standard with check valves.
/Asset/24510_3.jpg
The Heatguard® 145 is specifically intended for use in conjunction with individual faucets and electronic sensor faucets.
The Heatguard® 145 is a compact, high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third-party listed for individual point-of-use applications.
The Heatguard® 145 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and reacts to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. It provides stable operation at flow rates as low as 0.34 gpm (1.3 l/min). The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 145 features a snap-on cover over a spindle mechanism that requires a special tool to adjust the temperature. The special tool is provided with each valve.
The Heatguard® 145 has inlet connections to suit a 3/8" flexible hose connector or a compression connection to 3/8" OD tube. Also available with cold water bypass and elbow insert fittings. Supplied standard with integral check valves on both inlets to prevent cross-flow.
/Asset/24524_3.jpg
The Masterguards are central mixers intended for installation in the plant room of commercial and industrial facilities to distribute controlled temperature water to the domestic hot water system of a whole building or a section of the building.
The Masterguard incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Masterguard features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valves are third party listed to ASSE 1017 and CSA B 125.3 standards.
The Masterguard valves have an adjusting knob that can be locked at a desired temperature. Alternatively it can function in an adjusting mode, with the handle clearly marked to indicate the direction to turn to achieve hotter or colder water temperatures.
Each valve has integral mounting feet to allow it to be securely fixed to a wall or frame.
The Masterguard is shipped complete as a kit with 4-in-1 service fittings (integral ball valve, strainer, gauge/flushing port and check valves) on each inlet. The service fittings have a female inlet thread that secure to the base through union connections. The mix water outlet is female NPT. The Masterguard series are available in sizes from ¾” to 2”.
/Asset/Masterguard_800.JPG
The Heatguard® TAFR is an ASSE 1062 approved thermostatic device that reduces water flow through the fixture to .25 gpm if water temperature exceeds 117° F (47° C). It is ideal for new installations or retrofits on lavatory faucets or showers.
The Heatguard® TAFR devices use proven thermostatic element technology.
Applications for Heatguard® TAFR TAFR devices are almost endless; private and public housing, child care centers, hospitals, hotels/motels, nursing homes and more.
/Asset/24718_3.jpg
The Heatguard® 135 is specifically intended for use in conjunction with individual faucets and electronic sensor faucets.
The Heatguard® 135 is a compact, high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third-party listed for individual point-of-use applications.
The Heatguard® 135 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and react to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. It provides stable operation at flow rates as low as 0.25 gpm (1.0 l/min). The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 135 features a threaded cover over a spindle mechanism that requires a special tool to adjust the temperature. The special tool is provided with each valve.
The Heatguard® 135 has inlet connections to suit a 3/8" flexible hose connector or a compression connection to 3/8" OD tube. Also available with cold water bypass and elbow insert fittings. Supplied standard with integral chech vlaves on both inlets to prevent cross-flow. /Asset/25686-_a1.jpg
The Heatguard® 160 is intended to control the water temperature to individual or multiple fixtures such as sinks, lavatories, or bath tubs to reduce the risk of scalding and thermal shock. It can also be installed in gang shower applications where the bather has no access to the temperature adjustment means.
The Heatguard® 160 is a high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for individual point-of-use applications.
The Heatguard® 160 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and reacts to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 160 features a snap-on cover over a spindle mechanism that requires a special tool to adjust the temperature. This special tool is provided with each valve.
The Heatguard® 160 is shipped complete as a kit with your choice of end connections in 1/2" & 3/4" sizes. Available end connections are sweat, CPVC, PEX, threaded and SharkBite®. All valves are supplied standard with check valves. /Asset/HG160.jpg
The Heatguard® 110-HX has an outlet temperature range extending to 176°F (80°C), making it ideal for applications in heating systems or in any installation requiring the delivery of reduced temperature hot water.
The Heatguard® 110-HX is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed.
The Heatguard® 110-HX incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery water temperature even under changing flows or variations in supply temperatures.
The Heatguard® 110-HX is shipped complete as a kit with your choice of end connections in 1/2", 3/4" & 1" sizes. Available end connections are sweat or threaded. All valves are supplied standard with check valves at hot and cold water inlets. /Asset/HG110-HX.jpg
The Heatguard® 115 is intended for installation at water heater to distribute controlled temperature water throughout the domestic hot water system for larger residential and commercial applications. The valve is factory set to deliver water at a maximum of 120ºF (49ºC), allowing the heater to be set at 140ºF (60ºC) or higher, thus providing a greater effective volume of hot water and reducing the chances of legionella bacteria growth in the water. The outlet water flow rate is 27.2 gpm at 50 psi, making it suitable for larger residential and commercial installations.
The Heatguard® 115 has an outlet temperature range extending to 176°F (80°C), making it ideal for applications in heating systems or in any installation requiring the delivery of reduced temperature hot water.
The Heatguard® 115 is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. It incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery water temperature even under changing flows or variations in supply temperatures. Every valve is tested for performance on an automated testing station during the assembly process.
The Heatguard® 115 is shipped complete as a kit with your choice of end connections in 3/4", 1” & 1 1/4" sizes. Available end connections are sweat or threaded. All valves are supplied standard with check valves at hot and cold water inlets. /Asset/HG115.jpg
The MasterGuards are central mixers intended for installation in the plant room of commercial and industrial facilities to distribute controlled temperature water to the domestic hot water system of a whole building or a section of the building. The MasterGuard incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The MasterGuard features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valves are third party listed to ASSE 1017 and CSA B 125.3 standards. The MasterGuard valves have an adjusting knob that can be locked at a desired temperature. Alternatively it can function in an adjusting mode, with the handle clearly marked to indicate the direction to turn to achieve hotter or colder water temperatures.
The MasterGuard is shipped complete as a kit with service fittings (integral shut-off valve and gauge port) on each inlet. The check valve and strainer assembly are housed in the body of the valve for easy serviceability. The valves comes with a temperature gauge that could be mounted either on the mixed outlet or the two inlets. The service fittings have a female inlet thread that secure to the base through union connections. The mix water outlet is female NPT. The MasterGuard series is available in sizes from ¾" to 2". /Asset/Masterguard_Plus.jpg
Tank Booster Pro
(4) Cash Acme Tank Booster is a Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120°F (49°C).The Tank Booster is intended for installation at the water heater to distribute controlled temperature water through hot water systems in residential and commercial applications. The valve delivers water at 120°F (49°C), allowing the heater to be set at 140°F (60°C) or higher, thus providing a greater effective volume of hot water and reducing the chances of Legionella bacterial growth in the water.
The Tank Booster is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed.
The Tank Booster incorporates a fast-acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Tank Booster is factory set at 120°F (49°C), but can easily be adjusted.
The Tank Booster is designed for easy and quick installation and is shipped complete with the valve, flexible connector and water heater tee. Can be used with SharkBite flexible water heater connectors for easy installation while using Copper, PEX, or CPVC tubing. Does not require any transition fittings.
/Asset/24832_3.jpg
TMV - HG110-D LF
(14) The Heatguard® 110-D is a Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature to 120°F (49°C) maximum. The Heatguard® 110-D is designed to assist in the prevention of scalding.The Heatguard® 110-D is intended for installation at the water heater to distribute controlled temperature water through the domestic hot water system or at point-of-use applications. The valve delivers water at a maximum of 120°F (49°C), allowing the heater to be set at 140°F (60°C) or higher, thus providing a greater effective volume of hot water and reducing the chances of Legionella bacteria growth in the water.
The Heatguard® 110-D is a high quality mixing valve incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for both distribution and point-of-use applications.
The Heatguard® 110-D incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Heatguard® 110-D features a locking mechanism to prevent unwanted adjustment above 120°F (49°C).
The Heatguard® 110-D is shipped complete as a kit with your choice of end connections in 1/2", 3/4" & 1" sizes. Available end connections are sweat, CPVC, PEX, threaded and SharkBite®. All valves are supplied standard with check valves.
/Asset/24510_3.jpg
TMV - HG145 LF
(2) The Heatguard® 145 is a compact Thermostatic Mixing Valve that mixes hot water with cold to deliver tempered water at a constant temperature.The Heatguard® 145 is specifically intended for use in conjunction with individual faucets and electronic sensor faucets.
The Heatguard® 145 is a compact, high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third-party listed for individual point-of-use applications.
The Heatguard® 145 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and reacts to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. It provides stable operation at flow rates as low as 0.34 gpm (1.3 l/min). The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 145 features a snap-on cover over a spindle mechanism that requires a special tool to adjust the temperature. The special tool is provided with each valve.
The Heatguard® 145 has inlet connections to suit a 3/8" flexible hose connector or a compression connection to 3/8" OD tube. Also available with cold water bypass and elbow insert fittings. Supplied standard with integral check valves on both inlets to prevent cross-flow.
/Asset/24524_3.jpg
TMV - Masterguard 800 Series - LF
(4) The Masterguard Series is a High Flow Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature up to 150°F (65°C) maximum.The Masterguards are central mixers intended for installation in the plant room of commercial and industrial facilities to distribute controlled temperature water to the domestic hot water system of a whole building or a section of the building.
The Masterguard incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The Masterguard features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valves are third party listed to ASSE 1017 and CSA B 125.3 standards.
The Masterguard valves have an adjusting knob that can be locked at a desired temperature. Alternatively it can function in an adjusting mode, with the handle clearly marked to indicate the direction to turn to achieve hotter or colder water temperatures.
Each valve has integral mounting feet to allow it to be securely fixed to a wall or frame.
The Masterguard is shipped complete as a kit with 4-in-1 service fittings (integral ball valve, strainer, gauge/flushing port and check valves) on each inlet. The service fittings have a female inlet thread that secure to the base through union connections. The mix water outlet is female NPT. The Masterguard series are available in sizes from ¾” to 2”.
/Asset/Masterguard_800.JPG
TMV - Heatguard TAFR - LF
(2) Cash Acme Heatguard® Temperature Actuated Flow Reducing (TAFR) devices help protect against scalding.The Heatguard® TAFR is an ASSE 1062 approved thermostatic device that reduces water flow through the fixture to .25 gpm if water temperature exceeds 117° F (47° C). It is ideal for new installations or retrofits on lavatory faucets or showers.
The Heatguard® TAFR devices use proven thermostatic element technology.
Applications for Heatguard® TAFR TAFR devices are almost endless; private and public housing, child care centers, hospitals, hotels/motels, nursing homes and more.
/Asset/24718_3.jpg
HG135 LF
(2) The Heatguard® 135 is a compact Thermostatic Mixing Valve that mixes hot water with cold to deliver tempered water at a constant temperature.The Heatguard® 135 is specifically intended for use in conjunction with individual faucets and electronic sensor faucets.
The Heatguard® 135 is a compact, high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third-party listed for individual point-of-use applications.
The Heatguard® 135 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and react to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. It provides stable operation at flow rates as low as 0.25 gpm (1.0 l/min). The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 135 features a threaded cover over a spindle mechanism that requires a special tool to adjust the temperature. The special tool is provided with each valve.
The Heatguard® 135 has inlet connections to suit a 3/8" flexible hose connector or a compression connection to 3/8" OD tube. Also available with cold water bypass and elbow insert fittings. Supplied standard with integral chech vlaves on both inlets to prevent cross-flow. /Asset/25686-_a1.jpg
HG160 Series–Lead Free
(8) The Heatguard® 160 is a next generation Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature. The Heatguard® 160 is designed to assist in prevention of scalding and thermal shock.The Heatguard® 160 is intended to control the water temperature to individual or multiple fixtures such as sinks, lavatories, or bath tubs to reduce the risk of scalding and thermal shock. It can also be installed in gang shower applications where the bather has no access to the temperature adjustment means.
The Heatguard® 160 is a high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for individual point-of-use applications.
The Heatguard® 160 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and reacts to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.
The Heatguard® 160 features a snap-on cover over a spindle mechanism that requires a special tool to adjust the temperature. This special tool is provided with each valve.
The Heatguard® 160 is shipped complete as a kit with your choice of end connections in 1/2" & 3/4" sizes. Available end connections are sweat, CPVC, PEX, threaded and SharkBite®. All valves are supplied standard with check valves. /Asset/HG160.jpg
HG110HX Series–Lead Free
(6) The Heatguard® 110-HX is a Temperature Actuated Mixing Valve that mixes hot water with cold to deliver hot water at a reduced temperature.The Heatguard® 110-HX has an outlet temperature range extending to 176°F (80°C), making it ideal for applications in heating systems or in any installation requiring the delivery of reduced temperature hot water.
The Heatguard® 110-HX is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed.
The Heatguard® 110-HX incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery water temperature even under changing flows or variations in supply temperatures.
The Heatguard® 110-HX is shipped complete as a kit with your choice of end connections in 1/2", 3/4" & 1" sizes. Available end connections are sweat or threaded. All valves are supplied standard with check valves at hot and cold water inlets. /Asset/HG110-HX.jpg
HG115 Series–Lead Free
(4) The Heatguard® 115 is a large sized high flow rate Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled pre-set temperature.The Heatguard® 115 is intended for installation at water heater to distribute controlled temperature water throughout the domestic hot water system for larger residential and commercial applications. The valve is factory set to deliver water at a maximum of 120ºF (49ºC), allowing the heater to be set at 140ºF (60ºC) or higher, thus providing a greater effective volume of hot water and reducing the chances of legionella bacteria growth in the water. The outlet water flow rate is 27.2 gpm at 50 psi, making it suitable for larger residential and commercial installations.
The Heatguard® 115 has an outlet temperature range extending to 176°F (80°C), making it ideal for applications in heating systems or in any installation requiring the delivery of reduced temperature hot water.
The Heatguard® 115 is a high quality mixing valve incorporating the latest in thermostatic technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. It incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery water temperature even under changing flows or variations in supply temperatures. Every valve is tested for performance on an automated testing station during the assembly process.
The Heatguard® 115 is shipped complete as a kit with your choice of end connections in 3/4", 1” & 1 1/4" sizes. Available end connections are sweat or threaded. All valves are supplied standard with check valves at hot and cold water inlets. /Asset/HG115.jpg
Masterguard Plus
(6) The MasterGuard Series is a High Flow Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature up to 150°F (66°C) maximum.The MasterGuards are central mixers intended for installation in the plant room of commercial and industrial facilities to distribute controlled temperature water to the domestic hot water system of a whole building or a section of the building. The MasterGuard incorporates a fast acting, high quality thermostatic element that senses the outlet water temperature and reacts to maintain a stable delivery temperature even under changing flows or variations in supply temperatures. The valve also greatly reduces the outlet flow in the event of a cold water supply failure.
The MasterGuard features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valves are third party listed to ASSE 1017 and CSA B 125.3 standards. The MasterGuard valves have an adjusting knob that can be locked at a desired temperature. Alternatively it can function in an adjusting mode, with the handle clearly marked to indicate the direction to turn to achieve hotter or colder water temperatures.
The MasterGuard is shipped complete as a kit with service fittings (integral shut-off valve and gauge port) on each inlet. The check valve and strainer assembly are housed in the body of the valve for easy serviceability. The valves comes with a temperature gauge that could be mounted either on the mixed outlet or the two inlets. The service fittings have a female inlet thread that secure to the base through union connections. The mix water outlet is female NPT. The MasterGuard series is available in sizes from ¾" to 2". /Asset/Masterguard_Plus.jpg
