CAD (0)
▾
Unit of Measure
Type |
N/A End Cap |
Connection Type |
N/A SharkBite |
Size |
N/A 1/2" |
Maximum temperature |
N/A 200 ºF93 ºC |
Maximum pressure |
N/A 200 psi |
A |
N/A 1.02 in |
B |
N/A 0.97 in |
C |
N/A 0.94 in |
D |
N/A 0.1 in |
Body Material |
N/A DZR Lead-Free Brass |
Tube Liner Material |
N/A Polysulfone |
O-Ring Material |
N/A EPDM |
Protection Ring Material |
N/A Glass Filled Nylon |
Grab Ring Material |
N/A Stainless steel |
Demount Ring Material |
N/A POM |
Cartridge Ring Material |
N/A POM |
Features and Benefits |
N/A
Compatible with PEX, copper, CPVC, PE-RT and HDPE pipe in any combination. No special tools, crimping, glue or soldering required. Can be installed in wet lines. Approved for underground and behind-the-wall applications with no access panels (wrapping required when burying underground). Remove using a Disconnect Clip or Disconnect Tongs (both sold separately). Large diameter fittings (1-1/4 in. - 2 in.) require a Stiffener (sold separately) when connecting to PEX pipe. Rated for 200 psi and 200°F (93°C). 25-year warranty. |
Application |
N/A
Potable water Recirculation Radiant heating (w/ Glycol concentration up to 100%) Approved for direct burial (see wrapping for direct burial section) |
Specification |
N/A The tube shall be inserted into the SharkBite PTC Fitting in the first stage through a release collar and then through a stainless-steel grab ring. The grab ring has teeth that open out and grip onto the tube. At the second stage, the tube shall be pushed through an O-ring protector, which aligns the pipe. A specially formulated EPDM O-ring shall be compressed between the wall of the fitting and the tube before the end of the tube reaches the tube stop. Only when the pipe has passed through the O-ring and reached the pipe stop shall a secure joint be created. The fitting shall be a SharkBite PTC Fitting. |
