The Reliance Worldwide Corporation Limited Logo
Reliance Worldwide Corporation
RWC global headquarters
Phone: 1-877-700-4242
Fax: 1-877-700-4280
Email: AskRWC@rwc.com
2300 Defoor Hills Rd. NW
Atlanta, GA 30318
United States

Print Back
The Heatguard® 160 is a next generation Temperature Actuated Mixing Valve that mixes hot water with cold to deliver tempered water at a controlled temperature. The Heatguard® 160 is designed to assist in prevention of scalding and thermal shock.

The Heatguard® 160 is intended to control the water temperature to individual or multiple fixtures such as sinks, lavatories, or bath tubs to reduce the risk of scalding and thermal shock. It can also be installed in gang shower applications where the bather has no access to the temperature adjustment means.

The Heatguard® 160 is a high specification product incorporating the latest in Thermostatic Technology. It features a robust design based on the expertise gained from years of experience in the design and manufacture of safety valves. Every valve is tested for performance on an automated testing station during the assembly process. The valve is third party listed for individual point-of-use applications.

The Heatguard® 160 features a rapid response thermostatic element for superior control. The thermostatic element senses the outlet water temperature and reacts to maintain a constant delivery temperature even under changing flows or variations in supply temperatures or pressures. The valve also reduces the outlet flow to a trickle in the event of a cold water supply failure.

The Heatguard® 160 features a snap-on cover over a spindle mechanism that requires a special tool to adjust the temperature. This special tool is provided with each valve.

The Heatguard® 160 is shipped complete as a kit with your choice of end connections in 1/2" & 3/4" sizes. Available end connections are sweat, CPVC, PEX, threaded and SharkBite®. All valves are supplied standard with check valves.
Unit of Measure

Specifications

Type

 N/A Thermostatic Mixing Valves

Connection Type

 N/A Sweat

Size

 N/A 1/2"

Operating Temperature [Min]

 N/A 95 ºF35 ºC

Operating Temperature [Max]

 N/A 120 ºF48.9 ºC

Operating Pressure [Max]

 N/A 145 psi

Flow Rate Minimum

 N/A 0.34 gpm (1.3 l/min)

Flow Rate Maximum

 N/A 11 gpm (42 l/min)

Factory Set Outlet Temperature Range

 N/A 115 – 120 ºF (46.1 – 48.9 ºC)

Hot Temperature Supply Range

 N/A 120 – 180 ºF (48.9 – 82.2 ºC)

Cold Temperature Supply Range

 N/A 39 – 80 ºF (3.9 – 26.7 ºC)

Dimensions

A

 N/A 4.84 in122.92 mm

B

 N/A 4.72 in119.79 mm

C

 N/A 2.67 in

D

 N/A 3.31 in84.00 mm

E

 N/A 1.91 in48.39 mm

Material

Body Material

 N/A DZR brass

Seals Material

 N/A EPDM

Springs Material

 N/A Stainless Steel

Internal Cap Material

 N/A Brass

Piston Material

 N/A Engineered Polymer

Details

Features and Benefits

 N/A Every valve is tested for performance prior to shipping: Specify and install with confidence! Accurate temperature control, even under varying supply conditions: Increased user comfort and convenience. Robust, low complexity construction: Superior reliability, improved user safety. Total flow shut-off if cold supply fails: Greater end user safety. Unique, purpose designed adjuster tool: Minimizes unauthorized tampering with valve setting. Listed by ASSE, CSA, and IAPMO: Inspector friendly, peace of mind!

Specification

 N/A A Temperature Actuated Mixing Valve shall be installed to individual fixtures such as sinks, lavatories, or bath tubs; or multiple fixtures such as gang shower applications where the bather has no access to the temperature adjustment means; to reduce the risk of scalding and thermal shock. The valve shall be certified to ASSE 1069, ASSE 1070 and CSA B 125.3 standards and shall be listed by a third party. The temperature actuated mixing valve shall control the delivered water temperature via a regulating piston made from engineered polymer. A special tool shall be required to adjust the outlet temperature and the adjusting mechanism shall be hidden by a snap-on-cover. The valve shall be a Cash Acme Heatguard® 160 LF.

Typical Installation

 N/A The Heatguard® 160 is a high performance Thermostatic Mixing Valve designed to control the water temperature to individual or multiple fixtures such as sinks, lavatories, or bath tubs to reduce the risk of scalding and thermal shock. It can also be installed in gang shower applications where the bather has no access to the temperature adjustment means.

Certifications

 N/A The Cash Acme Heatguard® 160 LF is certified to ASSE 1069, ASSE 1070, CSA B125.3, NSF 372, NSF/ANSI 61, and listed by ASSE, CSA, and IAPMO for use in accordance with U.S. and Canadian plumbing codes.