The HOLDRITE #111-S is a Copper-Bonded™ and supports both 1/2" and 3/4" pipes. Designed to fit within a 3-1/2" wall. The #111-S positions water supplies for lavatories and other fixtures. Mount the #111-S to the vertical vent or waste pipe with the self-locking 4" stainless steel band using the isolating felt and solder your pipes to the bracket. The 1/2" notches provide 4", 6" or 8" centers, while the 3/4" notches provide 4" or 8" centers. When soldering, heat the pipe, not the bracket.

Positions and secures water closet supply above floor. Copper-Bonded™ heavy duty 16 gage reinforced bracket with horizontal mounting base and fastener holes. Mounts to top or face of base plate/mud sill, or under plate directly to floor. Positions and solders 1/2" CTS copper at heights up to 9". Features vertical pattern of 6 pipe holes (5 extruded): 4 on 1" centers from 6" to 9" high, plus holes at 4-1/2" and 2-3/4". Works with single or double floor plate. When soldering, heat the pipe, not the bracket.

The HOLDRITE® #V-2 is a Copper-Bonded™ steel bracket designed to saddle horizontal water headers, with a load rating of 250 pounds, in tubing sizes ranging from 1/2" trough 3". The #V-2 comes pre-assembled with isolating felt and a 5" self-locking stainless steel band attached. Ideal for pre-fab installations. Simply attach the #V-2 to adjacent surface or piping and position the horizontal water header. Solder the tubing to the #V-2 bracket. Heat the pipe, not the bracket.

The HOLDRITE #102-18 & #102-26 are Copper-Bonded steel bracket with holes to support 3/4" and 1" copper tubing.Used to support stub-outs for hot water tanks, urinal and other fixtures. When soldering, heat the pipe, not the bracket.