Cast-in-Place Firestop Sleeves
cast-in-place-firestop-sleeves
HydroFlame Pro Firestop Sleeve Extension
(6)- Extends the height of HOLDRITE HydroFlame Pro Series sleeves by as much as 4-3/4 in 1/4” increments
- No coupling needed for connection to sleeves
- Ideal for use on concrete pours over 12”
- Available for all HOLDRITE HydroFlame Pro Series sleeve sizes
- Connects to safety caps, water dams, water modules and underside of sleeves
HydroFlame Pro Closet Flange Sleeve
(4)- UL Listed firestop device – 3 hour F-Rating
- Models for 3” or 4” toilet flanges (Flanges Not Included)
- For both plastic and no-hub cast iron drain piping
- Mid-body seal provides water-tight penetration
- Adjustable height sleeve up to 12”
- Extensions are available for slabs over 12”
HydroFlame Pro Shower Drain Sleeve
(2)- UL Listed firestop device – 3 hour F-Rating
- For 2” shower/floor drains (Drain Not Included)
- Allows for a recessed drain body in shower pans and shower stalls
- Accepts plastic drain piping
- Adjustable height sleeve – up to 14 3/4” slab height
- Extensions available
HydroFlame Pro Cast Iron Drain Sleeve
(4)- UL Listed firestop device
- For no-hub cast iron drains and piping
- Mount drain body on top of sleeve and secure to deck
- For cast-in-place drains (Drain Not Included)
- For Neo-Lock style drain outlets
- Extensions available
HydroFlame Pro Cable and Line Set Sleeve
(6)- UL Listed firestop device – 2-3 hour F-Rating
- Accepts multiple data, phone, electrical cables, fiber cables, coax, refrigeration line-sets
- Accepts cable fill up to 45%
- Accepts multiple tubing-water lines, etc.
- Some models are height adjustable
- Extensions also available
HydroFlame Large Diameter Hollow Sleeve
(3)- UL Listed Firestop Devices
- For use with Plastic, Metallic, and Insulated Metallic penetrants from 8” to 12” in diameter
- Tested in concrete slabs up to 3 Hour F Rating (for 6” and thicker slabs)
- Safety caps meet OSHA hole cover requirements
- L Ratings and W Ratings available. W Ratings achievable using sealants
- Sleeves are built 8” tall, but can be cut as short as 6”
- Extensions available in 1” high increments to match slab thicknesses
- Extensions can be added to create a 2” water dam after concrete pour
- Extensions/Water Dam can support weight of a riser clamp
- Hollow Sleeves Available for use with traditional firestop sealants
HydroFlame Pro Corrugated Metal Deck Plates
(7) The HOLDRITE® Hydroflame "Corrugated Metal Deck Plates" transition cast-in-place firestop sleeving devices from use on a flat form deck into a sleeve for use on a corrugated metal form deck. Available for all Pro Series Sleeve sizes. Steel plate snaps onto the Base of the sleeve securely. (#8 screws can be be added for increased strength) Deck-Plate.JPG HydroFlame Pro Water Dam
(6) The HOLDRITE® Hydroflame Pro Series "Water Dam" attaches to the top of the Pro Series cast-in-place firestop sleeves and adds a 2" tall water dam barrier at the perimeter of the sleeve opening. Sizes are available to fit all Pro Series Sleeves, for all sizes of penetrants 1/4" thru 6" nominal size. Thread sealant may be added to male threads prior to installation, if desired. UL-Listed accessory when used with HOLDRITE's Hydroflame Pro Series Sleeves. Water-Dam.JPG HydroFlame Pro Water Module
(5)- Provides added water protection for HOLDRITE HydroFlame Pro Series Sleeves
- Prevents debris from falling into annular space around piping
- Pre-installed prior to concrete pour
- Available for all HOLDRITE HydroFlame Pro Series Sleeve sizes
- Adds 1/2” to the overall height of pro series sleeves
- Accepts safety cap and other HOLDRITE HydroFlame Pro Series accessories
- UL W-Rated seal, water-tight for most penetrants
HydroFlame Pro Aerator Adapter
(5)- Provides a recess in the underside of the concrete floor, for fitting access
- Available for use with 2”, 3”, 4” & 6” HOLDRITE HydroFlame Pro Series Sleeve
- For use in concrete floors as thin as 5-1/2”
- Ideal for Sovent and other high and tight fitting joint access
