The Cash Acme SharkBite® Check Valve is a general purpose spring Check Valve that prevents the reverse flow of water. The SharkBite® Check Valve can be installed horizontally and vertically and can be connected in seconds to copper tubing, and CTS CPVC and Pex.

The EB-45 Direct SharkBite with Slip Feature (EB45-SDSB) is a half-cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve.

The EB45-SDSB features integral SharkBite connections in 1/2" and 3/4" sizes along with an added slip feature for easy installation. Connect the SharkBite pressure regulating valve to copper tubing and CTS CPVC with ease. The added slip feature allows for simple replacement of an existing regulator or allows installation in an existing line where there is little to no slack in the pipe system.

These valves are supplied by the factory with a standard delivery setting of 45 psi but the outlet pressure can be adjusted from 10-70 psi without changing the spring. The EB45-SDSB is intended for use where supply line pressure does not exceed 200 psi and is suited for either cold or hot (to 180°F) water service.

The Cash Acme EB-45 Double Union SharkBite Pressure Regulating Valve (EB45-DUSB) is a half-cartridge based pressure reducing and regulating valve with a bronze body. The valve construction is similar to a traditional regulator in that it retains a separate spring chamber and adjusting screw, but offers the simplicity and maintenance benefits of a cartridge based valve.

The EB45-DUSB is assembled using modular construction methods and features union SharkBite connections in 1/2" through 1" sizes. Connect the SharkBite pressure regulating valve to copper tubing, and CTS CPVC and PEX in seconds with ease.

The EB45-DUSB is supplied by the factory with a standard delivery setting of 45 psi. The outlet pressure can be adjusted from 10-70 psi without changing the spring. This valve is intended for use where supply line pressure does not exceed 200 psi, and is suited for either cold or hot (to 180°F) water service.